---
updatedAt: 2025-11-11T01:48:29.000Z
agentTools:
  projectIndex: https://docs.formant.io/llms.txt
---

# Add a relocalization stream

> 📘 A new teleoperation experience is here.
>
> We've released a new teleoperation experience. See the Getting Started guide for documentation on creating an observability dashboard.
>
> The documents in this section refer to the legacy teleoperation experience.

This guide will teach you how to add a relocalization stream to your teleoperation view.

# Prerequisite: Add a navigation stream

You must have a navigation stream configured for your device before you can add a relocalization stream. For more information, see [Add a navigation stream](https://docs.formant.io/docs/add-a-navigation-stream).

# Step 1: Navigate to device teleoperation settings

1. In Formant, in the upper-left corner, open the menu and click **Settings**.
2. Click **Devices**, and then click on the device you want to configure.
3. Click on the **Teleoperation** tab to open the teleoperation configuration page.

# Step 2: Configure a relocalization stream

Formant supports the `geometry_msgs/PoseWithCovarianceStamped` data type.

1. In the teleoperation configuration page, scroll down to **Relocalization** and click the **plus (+) icon**.
2. Formant will display a list of candidate streams on which you can post a new initial pose. Select one of these streams, or click **Add ROS Topic**:

![](https://files.readme.io/20674ff-Screenshot_from_2021-10-01_10-15-13.png "Screenshot from 2021-10-01 10-15-13.png")

3. Enter the ROS topic which contains your relocalization data.
4. Click **Done**, and then **Save** to confirm your teleoperation settings.

# Step 3: Learn about localization and relocalization workflows

Once you've configured your robot's localization streams, continue onto [Localization and relocalization workflow](https://docs.formant.io/docs/getting-started-using-the-relocalization-workflow).

# See also

* [Teleoperation: Add a localization stream](https://docs.formant.io/docs/getting-started-add-a-localization-stream)
* [Localization and relocalization workflow](https://docs.formant.io/docs/getting-started-using-the-relocalization-workflow)

<Callout icon="👋" theme="default">
  ### If you notice an issue with this page or need help, please reach out to us! Use the 'Did this page help you?' buttons below, or get in contact with our Customer Success team via the Intercom messenger in the bottom-right corner of this page, or at [support@formant.io](mailto:support@formant.io).
</Callout>